diy-plumbing

Tips And Tricks To Help Fix The Most Common Plumbing Problems

Home ownership can be a beautiful thing. Fixing up things around the house to make it look nicer can be fun.

Eventually, however, there will come a time when every homeowner runs into a plumbing problem. This can be a major headache and a dent in the wallet if the individual has to call a professional to fix the clog or leak. By knowing a few simple tricks, anyone can save money by fixing their own clogged toilets or leaky faucets.

Know Your Pipes

pipesKnowing what type of piping that is used in a home is crucial. State building codes can stipulate the different type of pipe material for various applications. Rigid copper pipe, for example, is usually used on residential homes. Rigid copper cannot be bent and must be soldered at joints with special tees.

Soldering Techniques

plumbing-soldering

The most common mistake when beginning to solder is not making the inside and outside of the pipe perfectly clean. It should be scrubbed shiny, bright with an emery cloth. Once the ends are cleaned, apply heat only to the fitting. This causes the solder to be sucked into the fitting and makes a more solid joint.

Fixing Leaks

fix-leakFixing a leak in a copper pipe is relatively simple. First of all turn off the water supply at the main. Then, track down the leak and allow the pipe to drain. Cut around the site of the leak with a tubing cutter. Prepare both pipe ends for soldering and then attach a union to them. The union is simply a larger copper pipe that will fit snugly over the existing one. Often, condensation will be mistaken for a leaky toilet. A simple way to determine whether or not it is a leak is to add food coloring to the basin.

Clogged Drains

clogged-drainA slowly draining sink or shower can be a real annoyance. This is usually due to sludge building up in the plumbing system over time. The only way for a homeowner to deal with this problem short of calling a contractor is to use a snake. This long metal wire is flexible and able to turn the tight corners of pea-traps in drains.

Clanging Or Hammering Pipes

When pipes make a loud hammering noise when the toilet is flushed, it is usually caused by pressure building up in the plumbing system. Sometimes the hammering can turn into a loud clanging and is very annoying. By turning down the pressure at the stop-valve, a homeowner can stop this from happening.

With older houses, plumbing problems can be a major issue. With old, sludge filled pipes, clogs and slow draining sinks and showers start to become an issue. Still, with a few tips and tricks anyone can save a little money before calling a reputable contractor likeĀ Snowman evaporative cooler services

Leave a Reply

Your email address will not be published. Required fields are marked *